This turnkey package discount is a limited time offer.  This complete Access Control will provide the security and convenience you require for your home or business. You get all of the essential components and instructions on how to wire and program the system in one complete package

 The components included  in this set are: 

1. Access Control Keypad, back lit two relay output   (9522BL Details)  
2. Magnetic Lock, 600Lbs with LED and Dry Contact Door Closure Indications (YM280LED Details)
3. Exit Button Switch Model 802  (802 Exit Details)  
4. 120VAC/12VDC Wall plug in transformer (Transformer Details)

 This system will provide you with the following features and benefits:

• Control Access to an entrance such as a restricted door or gate, by assigning codes to one or more users. 
• Entering an assigned code will activate the Magnetic Lock and open the door.
• If you choose you can program the keypad to toggle mode allowing you to enter the code and activate the lock to remain in the open position, and then deactivate the lock when you choose by entering the code yet again.
• Connect the second relay to your existing Home Burglar Alarm system or activation of light control before entering the house.
• Wire the Magnetic Lock dry contacts to the Keypad for an audible indication of the door closing.
• Magnetic Lock LED indicates:
  • No Light - Lock is not powered 
  • Red - Door is open
  • Green - Lock is powered and door closed 
• To exit, push the Exit button (mounted next to the exit door inside) and the door lock will be activated to the time programmed into the  keypad.

To learn about all of the key features, benefits and specifications click above on the individual package components.

Magnetic Lock Specifications

• Selectable Voltage Input : 12 VDC / 24 VDC 
• Current Draw : 12V / 500mA ; 24V / 250mA (±5%)
• Holding Force : 600 lbs   
• Spike Suppressors
• Anti-Rust Surface Treatment : Blue Zinc Plating
• Operating Temperature : 0-55° C ( 32~131° F)
• Operating Humidity : 0-95% ( non condensing)
• Dimensions : Magnet - (L)9 7/8 x (W) 1 5/8 x(T) 1 inch
• Armature - (L) 7 x (W) 1 1/2 x(T) 3/8 inch
• Dual Voltage Selectable per door  (12 VDC or 24 VDC)
• Low Current Consumption
• Reliable Holding Force
• Hall Effect Sensor Monitoring Output
• Green/Red LED Indication for EM Lock Status 
  • LED Green - Door Closed and Locked
  • LED Red -  Lock activated but door is open 
  • LED Off - Lock Deactivated
• Durable and Silent Operation
• Anodized Aluminum Casing
• Surge & Spike Protection PCB
• Anti-Tamper Jam Nuts
• Anti Residual Magnetism Kick Off Button

Access Control Keypad Specifications

• 12-24VDC operation range
• Over 100 Million Code Combinations
• 110 User Codes with 4-8 Digits
• Single Lock or Inter-lock Application
• Operates Fail-safe or Fail-secure Locking Device
• Door Lock Inhibit Authorization
• 2 Independent Relay Outputs 5A and 1A - Both have Normally Open (NO) and Normally Closed (NC) outputs
• Door Forced Open and Propped-up Warnings
• Auto or Manual Code Entry
• Output Activation Announcer
• Pacifier Tone Inhibit Control
• Key Activation, Duress and Tamper Outputs
• Door Auto Re-lock after Valid Access Prevents "Tailgate Entry"
• Egress Input for Door Remote Triggering
• All Features are Keyboard Programmable
• Non-volatile Memory in Power Failure
• Flush or Surface Mount
• Surface Mount Box in Black
• Size : 4 5/8"(H) X 3"(W) X 1 5/8"(D)